A blog about bookbinding, book conservation, artist's books, printmaking and interning.
Showing posts with label previous repair. Show all posts
Showing posts with label previous repair. Show all posts
Monday, July 19, 2010
Encapsulation and Screw Post Binding (2)
This book required a lot of attention. The original binding was two industrial staples, which had rusted and broken away from several pages. The pages had secured in their original positions using pressure sensitive tape (scotch tape). The pages were also terribly brittle. It would have been impossible to touch this book without causing more damage to the pages.
My first step was to remove all the pressure sensitive tape. Luckily, most of the original adhesive had deteriorated, and it came off easily. Next, I collated and pulled the book. Once I had all the pages separated, I placed them between Reemay and washed them. Twice in a warm water bath, and once with magnesium bicarbonate to act as a buffer.
Even after washing/deacidifying, the paper was still to brittle to guard and resew. So, I opted for encapsulation. This would enable the pages to be handled, and help prevent further damage. I encapsulated each page in Mylar, and bound them as a screw post binding.
These are pictures of the end result.
Wednesday, May 5, 2010
Leather Reback with Previous Repair
I picked this book off the cart because it had a lot of previous repairs. The sewing had broken and the text block was in two pieces. The sections closest to the break were being held in place with pressure sensitive tape. Being a tight backed book, the spine had also broken. The book was being held together by what looked like maroon duct tape. This tape was also on a few pages in the first section. There was also approximately ten pages of images, which had be cut down and taped together, in a random order, with pressure sensitive tape behind the title page.
I began be removing the tape from the spine. The adhesive was delaminating, so it peeled off easily, but did leave some residue on the leather. Next I removed the pressure sensitive tape from the pages of the text block with a tacking iron. I repositioned the now loose folios, cleaned the spine, and lined it with Japanese tissue and linen. Then I repaired the sewing at the break.
I worked on the images while my spine liners were drying. I removed the tape from all the images and lined the sheets with heat set tissue. The images were on single sheets, which I collated and guarded together. Then I tipped them on to the front of the text block with a thin strip of Japanese tissue.
Then I lifted the leather on the cover and attached the text block via the linen. I constructed a new spine piece from linen lined Morike and added a 10 pt board stiffener. I attached this under the leather, the glued the leather back down. Finally, I put some PVA and Japanese tissue on the corners to reshape them, and covered the linen hinge with a strip of Japanese tissue (paste).
This book was an experiment in toning techniques for leather. I toned the new spine piece prior to attaching, and I tried to stipple a variety of hues to better match the leather. My colors were a little light for this book, but overall I was pleased with how it looked. I plan on trying this technique again on other books.
I began be removing the tape from the spine. The adhesive was delaminating, so it peeled off easily, but did leave some residue on the leather. Next I removed the pressure sensitive tape from the pages of the text block with a tacking iron. I repositioned the now loose folios, cleaned the spine, and lined it with Japanese tissue and linen. Then I repaired the sewing at the break.
I worked on the images while my spine liners were drying. I removed the tape from all the images and lined the sheets with heat set tissue. The images were on single sheets, which I collated and guarded together. Then I tipped them on to the front of the text block with a thin strip of Japanese tissue.
Then I lifted the leather on the cover and attached the text block via the linen. I constructed a new spine piece from linen lined Morike and added a 10 pt board stiffener. I attached this under the leather, the glued the leather back down. Finally, I put some PVA and Japanese tissue on the corners to reshape them, and covered the linen hinge with a strip of Japanese tissue (paste).
This book was an experiment in toning techniques for leather. I toned the new spine piece prior to attaching, and I tried to stipple a variety of hues to better match the leather. My colors were a little light for this book, but overall I was pleased with how it looked. I plan on trying this technique again on other books.
Thursday, April 1, 2010
Previous Repair
I came across these two book on the end processing cart, which had previously been repaired in some way. Strike had a oxford hollow added to the spine which was keeping the spine piece attached.
With the Pictorial Family Encyclopedia, the spine was glued directly to the original lining to keep in in place. Also, the joints had been covered with strips of book cloth at some point which were delaminting.
My first step on both was to remove the spine piece. For Strike, I took a scalpel and cut the hollow at the joint, being careful not to damage the spine piece. For the encyclopedia, I was lucky because the original lining the spine piece was glued directly to was delaminating. I was able to totally remove the spine with a spatula. Next, I removed as much as I could of the old linings on both spine pieces with a spatula, and set the pieces aside.
From this point on, the encyclopedia became a standard rebacking job. The covers were already falling off, so I removed them, cleaning and lined the spine, repaired some sewing and then constructed a spine piece from linen lined Morike.
Strike was finished a little differently. This book had decorative endpapers that I did not want to disturb, and the covers were firmly attached. I still cleaned and lined the spine for support, and made a new Morike spine piece, but instead of breaking the joint, I lifted the cloth and brought the new material on to the boards.
Finally, I reattached the spine pieces and did some basic Japanese tissue repair to the covers on both. These are the finished books.
With the Pictorial Family Encyclopedia, the spine was glued directly to the original lining to keep in in place. Also, the joints had been covered with strips of book cloth at some point which were delaminting.
My first step on both was to remove the spine piece. For Strike, I took a scalpel and cut the hollow at the joint, being careful not to damage the spine piece. For the encyclopedia, I was lucky because the original lining the spine piece was glued directly to was delaminating. I was able to totally remove the spine with a spatula. Next, I removed as much as I could of the old linings on both spine pieces with a spatula, and set the pieces aside.
From this point on, the encyclopedia became a standard rebacking job. The covers were already falling off, so I removed them, cleaning and lined the spine, repaired some sewing and then constructed a spine piece from linen lined Morike.
Strike was finished a little differently. This book had decorative endpapers that I did not want to disturb, and the covers were firmly attached. I still cleaned and lined the spine for support, and made a new Morike spine piece, but instead of breaking the joint, I lifted the cloth and brought the new material on to the boards.
Finally, I reattached the spine pieces and did some basic Japanese tissue repair to the covers on both. These are the finished books.
Subscribe to:
Posts (Atom)