Showing posts with label acrylic. Show all posts
Showing posts with label acrylic. Show all posts

Friday, September 17, 2010

Leather Reback - PC4 Paper

This particular book originally had laced on boards. The board were now detached, but were important to keep. Since the original leather was delaminating from the boards, I decided to remove it and attach it to new boards. 
 
The first step was to clean and line the spine. Then I sewed on end bands, constructed end papers, and cut new boards. I attached the boards and put the book in a finishing press, where I molded a damp strip PC4 paper over the spine. This dried over night.
I was able to remove the original leather from the boards gently with a spatula. I also removed and kept the turn-ins. I glued down and turned in the new PC4 spine piece, infilled the boards, and glued down the original leather and turn-ins. Where sections of the turn-ins were missing, I glued down PC4 strips. I lined the board edges and missing areas with Japanese tissue. Then glued down the end papers, and toned the tissue to match. This was then end result.

Friday, July 23, 2010

Missing Board

This particular book was leather bound and missing its back board.
Normally, my first response would be to rebind the book. If the book had any important book plates, I would soak that board in a warm water bath, until the book plates floated off. Then I would reattach them to the new board when dry. However, this book had a nice book plate that was painted with fugitive inks. A water bath would have destroyed it. I  had to find another way to replace the board.
Since the front board was not attached, I used it as a guide to cut a new piece of board (make sure to account for the added thickness of materials at the squares). I sanded and back cornered the new board so it would tight against the shoulder. Then I cut new endpapers for the back cover, and attached them to the text block with paste.
I toned a piece of PC4 paper using and acrylics/methyl cellulose mix, to match the original leather. While that dried, I built up the corners on the remaining board.
I took the new board and covered it with the PC4 paper and put it in the press, between blotters, to dry flat. Since this paper is relatively thick, I also infilled the board with a 10 pt card (after pressing).
Because the original spine was a tight back and was still intact, I couldn't bring the new material around the spine. Therefore, I attached the new board as I would the originals, with Japanese tissue at the hinge and joint.
I attached the boards at the inner hinge first, using a strip of Japanese tissue and wheat starch paste. (This has to be done one at a time. Make sure the paste has ample time to dry). I reinforced this by adding additional tissue to the joint with PVA. I also reconstructed the head caps. I glued out a piece of tissue, overlapping on to both boards, and wrapped it around a piece of cord, the width of the spine and the height of the squares.
Finally, I toned all the tissue to match. This is the end result. (Middle: original leather board, Bottom: new PC4 board).

Monday, July 5, 2010

Building Up Corners

This was a leather bound book that I did Japanese tissue repair for. A couple of the corners were seriously damaged and misshaped.
To infill the corners, I cut small squares of board. These should be small enough to handle, but extend past the book's board edge so they can be trimmed to size later. I parred these squares of board at one corner, until they were thin enough to fit between the existing board. It is important not to par too far out. Remember the thickness of the square should be flush with the book's covers at the board edge. I attached these squares with PVA. Then I covered the new material with Japanese tissue, overlapping on to the original leather.

When all the corners were repaired, I toned them to match, and applied SC 6000 wax. This is the end result.

Tissue Repair on Leather

This particular book's joint was broken and the spine was loose. It also had damage to both end caps. I repaired these areas with Japanese tissue. Unfortunately, I was working on a group of seven tissue repairs and did not take "before" pictures. Because the leather was also deteriorating, I coated the entire book with Klucel G. This picture shows the book before toning.
I was very lucky because the color of this leather was easy to match. For this reason, I decided to tone the areas of deteriorated leather between the gold stamping. After doing this, I applied SC 6000 wax to the areas treated with tissue, to add shine and create the appearance of leather. This is the end result.

Thursday, June 10, 2010

Recent Rebacks

These are two cloth rebacks I completed simultaneously. Thankfully for both books the sewing was in tact. This first book's covers were detached, the end papers were delaminating, the spine round was askew, and the first three pages were loose.
I started by tipping in the loose pages with wheat starch paste. Then I pasted out and lined the spine, with Japanese tissue and linen. When both linings were dry, I gently hammered the spine to fix the round. Then I proceeded with a reback repair as usual. This is the end result.
This is the second book.

Sunday, June 6, 2010

The Thread That Binds - Design Binding

For The Bone Folder's 2010 Bind-o-rama, the text block chosen was The Thread That Binds. I worked on this design in my book binding class. I decided to sew the text block on raised cords. The signatures were very thick, so I decorated the edge with speckled blue acrylic. The leather I had to work with was a thick, gray, morocco grain. For a color scheme, I decided to go with gray and blue. I sewed the text block with blue thread (so it would show on the exposed cords), and sewed blue and gray end bands. For the boards, I glued pieces of mat board together. This provided me with the thickness I needed to match the leather, and was easily shaped by sanding. (I had to angle the boards to be thinner at the spine, so that book could open easily). I attached these boards to the text block by fraying and pasting out the cord on them.
I pared the leather and cut away the middle with a circle cutter. I also attached this with paste, leaving extra material out at the turn in to construct the head/tail cap. Then I infilled the covers, glued down the paste papers and trimmed the turn ins. For the joint, I pared two strips of the same leather thin and pasted them down, overlapping slighting on the text block and on to the board. When those dried, I rubbed them down flush with a bone folder at the spine, then infilled the boards and cut sheets of gray Roma for the end papers. The board sheet was glued down directly on the covers. The fly sheet however, was glued onto the text block using just a thin bead of PVA along the spine and fore-edge. Finally, I painted the exposed area of the spine to match the paste paper.

Friday, February 12, 2010

Wallpaper Samples - Part 3- Finishing Touches

Most of the wallpaper samples were intact, but there were a few with large areas missing. I tried two different treatment methods for these large areas. The first, and simplest was to simply replace the missing area with a similarly colored Morike. I would attach the Morike with paste before adding the Japanese tissue lining to the sample. Then I trimmed the Morike with the lining so it was flush. This is an example of this method.
The second method was to apply a thin Japanese tissue to the top of the sample, barely overlapping, with paste. Then tone the tissue with acrylics. (I think watercolor is generally more appropriate for this type of repair, but acrylic is all I had available. Therefore, I ensured this additional Japanese tissue layer could be removed, even after toning, by testing it on a small area. As long as the acrylic is not painted over the tissue edge, there should be no damage to the sample). I used this method sparingly because it was time consuming, difficult to match colors/patterns, and often unnecessary for the size of the missing area. These are two samples for which I did tone. 
After all the samples were treated, I made labels for each and interleaved sheets of Dove Gray, due to the variation in size. Finally, I encapsulated the samples in polyester film (Mylar) and constructed a screw-post binding (2010).