Showing posts with label book binding. Show all posts
Showing posts with label book binding. Show all posts

Thursday, February 9, 2012

More Limp Leather Journals

I got a message from the new shop manager at WNYBAC requesting more limp leather journals. So last night I made these ones up.


I used the paste papers I made last year for the inside covers.


And while I was at it, I made this awesome book for myself :-)


Saturday, August 21, 2010

Limp Leather Binding - Black

This was another sewing variation I tried. This technique requires signatures in multiples of three. Rather than adding an additional piece of leather to wrap around, I added a leather button.
This is the end result.

Tuesday, August 17, 2010

Limp Leather Binding - Teal

This summer I have been working on hand outs to use for teaching workshops. One of which, is for a limp binding. I researched some new sewing variations for the hand outs. This particular variation requires the number of signatures to be in multiples of three.
 As can be seen from my sewing card, you need access to all three signatures at the same time. To achieve this, I used clips to keep the two outer signatures in position, and rubber bands to secure the middle signature.
This is the end result.

Tuesday, August 10, 2010

Altered Book Workshop

This past Saturday, I was able to attend an altered book workshop at Syracuse University. It was a lot of fun, and I have to confess that I have been folding pages ever since. I wanted to post a couple pictures. First is me with the book I folded at S.U.
And these are some of the books I have folded since.

Tuesday, August 3, 2010

The Bone Folder

The Bone Folder is a recorded conversation between a bibliophile and master book binder from 1920"s Germany. My book binding instructor translated the text from it's original German, and gave me a copy for binding. I chose to covering it in a paper case because the text block was small, and this binding style is briefly discussed in the text.
The text block was sewn with two pieces of card for end sheets. The paste paper is folded around the card for support. This is an adhesive free binding, so the paper could be easily removed and the text block rebound if desired. If the cover was folded out, this is how the book would look.

Wednesday, June 23, 2010

German Springback

I have made one German style Springback before, and decided to make another, smaller one. Following these instructions, I made this.
 Note: Because my Springback was bound in leather, not only did I have to pare the edges, but I also had to pare the joint so the material would fit into the groove. I  was able to do this by first drawing a line where the grooves would be. Then, placing a brush handle under the line and running my paring knife along it. This removed a small amount of the leather, and gave me a guide to work from. I pared the rest thin using a scalpel.

Sunday, June 6, 2010

The Thread That Binds - Design Binding

For The Bone Folder's 2010 Bind-o-rama, the text block chosen was The Thread That Binds. I worked on this design in my book binding class. I decided to sew the text block on raised cords. The signatures were very thick, so I decorated the edge with speckled blue acrylic. The leather I had to work with was a thick, gray, morocco grain. For a color scheme, I decided to go with gray and blue. I sewed the text block with blue thread (so it would show on the exposed cords), and sewed blue and gray end bands. For the boards, I glued pieces of mat board together. This provided me with the thickness I needed to match the leather, and was easily shaped by sanding. (I had to angle the boards to be thinner at the spine, so that book could open easily). I attached these boards to the text block by fraying and pasting out the cord on them.
I pared the leather and cut away the middle with a circle cutter. I also attached this with paste, leaving extra material out at the turn in to construct the head/tail cap. Then I infilled the covers, glued down the paste papers and trimmed the turn ins. For the joint, I pared two strips of the same leather thin and pasted them down, overlapping slighting on the text block and on to the board. When those dried, I rubbed them down flush with a bone folder at the spine, then infilled the boards and cut sheets of gray Roma for the end papers. The board sheet was glued down directly on the covers. The fly sheet however, was glued onto the text block using just a thin bead of PVA along the spine and fore-edge. Finally, I painted the exposed area of the spine to match the paste paper.

Saturday, February 6, 2010

Limp Leather Long Stitch Binding

I was recently given some upholstery leather and wanted to find a way to use it. The leather was chrome tanned. This means the leather would be incredibly difficult to par and it's best use would be limp bindings.
To prepare the leather for a limp binding, I lined the back with paper and pressed it to ensure it dried as flat as possible. When I removed the leather, I noticed it had puckered in places from the paper shrinking. Fortunately I was able to fix this by rolling the leather. This unified the puckering and had a nice textual effect, which only worked because the leather was run through a machine at the upholstery factory. I gently sanded the leather to enhance the texture. Next, I trimmed the leather to the height I wanted, leaving the fore edge a little longer to trim later. Then I creased the area for the spine with a bone folder and cut slits for the sewing. Finally, I attached the text block and trimmed the fore edge. This is the end result (2010).

Thursday, January 28, 2010

First Design Binding - The Martian Chronicles

I decided I wanted to experiment with design binding. I went through my bookshelf looking for a good candidate and came across The Martian Chronicles by Ray Bradbury. I removed the original covers, endpapers and the mull one the spine. The book was perfect bound and the spine was slightly rounded. Because of this I did not want to cut and rebind the text block out of fear I would loose a substantial amount of the margins. Instead I left the spine intact, lined it with linen (PVA) and gently hammered it to accentuate the round. Next I attached new end sheets and hand sewn head and tail bands. For the case, I decided to do a quarter leather with paste paper and leather onlays. The running theme was Mars-esque colors - brown, red, orange, etc.
The piece I choose for the spine had a great triangular shape on one edge, which I cleaned up and decided to incorporate into my design. I started by paring the turn-ins of the leather, cutting my boards to size, and back cornering the boards slightly. Then I began to attach the spine. First I pasted out the leather and let it sit to absorb the moisture. Next I placed the text block (with boards in position) into a finishing press, leaving enough of the spine edge out to work with. I removed the excess paste from the leather, attached the spine stiffener, and positioned it on the book, ensuring the spine stiffener was in the proper location. Then I rubbed the leather down on the boards, removed the book carefully from the press and did the turn-ins. I left a little extra sticking up at each turn-in for the head and tail caps, which I constructed by gently dragging the case along the bench. I tried string around the spine (in the joint) and left the cover to dry.
To make the onlays, I pared 1" strips of leather very thin, then pasted them together on a piece of Mylar. When I was happy with the placement. I removed the mylar and lined the back with Japanese tissue and put the leather in a press. When it had dried, I cut circles out of visually interesting areas, and saved them for my cover design.
When the leather on the spine had dried, I infilled the boards with blotting paper (to absorb some of my onlays), then attached the paste paper, slightly overlapping the leather. After this was pressed and dried, I added my onlays and pressed the book again, putting circles cut from folder stock over the onlays to force them down into the blotter. Finally, I stamped the cover and cased in the book. These are pictures of the finished product (2010).
 

Tuesday, December 22, 2009

Japanese Style Binding

I wanted to do a Japanese binding as a variant from the Western styles I have been working with. I wanted a beveled edge, so I tore my folios from larger sheets of Gutenberg Laid. Traditional Japanese bindings have a relatively soft cover, so I used 20 point board. To cover the board, I cut my cloth to the necessary size and glued it down only at the turn-ins. I took one of my folios, tore it in half, and drummed the single sheets against the covered boards. I positioned the folios (fold at the foredge) and the boards, and used bulldog clips to keep everything in position while I drilled the holes with a Dremel. The design I chose for the spine sewing was "The Noble Bind" (Winter 2009).*
*From Japanese Bookbinding by Kojiro Ikegami.

Secret Belgian Binding

The Secret Belgian Binding was rediscovered by Hedi Kyle. I came across a copy of the instruction manual at Syracuse and decided to try the binding style. This is my Belgian:
 
The sewing was a little difficult. The hardest part was the getting the signatures attached to the spine sewing. I was using a pre-cut  text block, and cut my boards to fit that. My book was shorter and more square than the instructions size, and I wonder if my text block would have slipped less if I used the taller, rectangular dimensions.
The book cloth I chose caused the most problems. If I covered the boards too soon after applying the PVA, the glue caused the cloth to darken in several spots. I had to wait to for the glue to be almost entirely dry, then cover the board and reactive the PVA using a tacking iron. I also mistakenly tried to cut the corners at a 45 degree angle, and fold them over. This fabric frayed excessively after I folded the corners, and I had to apply some glue to keep the fibers down. If I was to use this book cloth again I would try lining it with Japanese tissue or even a different style of corners (Fall 2009).

Vellum Millimeter Binding

This is one of the first binding styles I learned in my bookbinding class. The text block Fine Printers Finely Bound Too was an exhibition catalog for the 1986 Guild of Book Workers exhibit held at the Metropolitan Museum of Art. It was cased in using the German method This is also the first time I have ever used a letter press (Fall 2009).
 

Medieval and Early Modern Stationer's Binding

This is the stationer's binding I made during my workshop with Chela Metzger at Syracuse University, as part of the Brodsky Lecture Series. We were given a blank, pre-punched text block, a piece of parchment, and leather scraps and strips. First we had to sew the text block on leather tapes. Next we folded the parchment (with white paper inside to make the parchment less see through, and to bring out the natural colors of the parchment. Then we attached leather shapes over the spine and punched holes for the overband designs and the star(s) on the flap. We were given notes on Italian and Spanish style stationer's bindings, including different templates for traditional overbands and stars, and were able to design our own from there. The designs were created by lacing leather strips through the punched holes. Once all the lacing was done, we attached the text block to the cover using parchment strips for tackets and constructed the leather button (Fall 2008).