Saturday, August 21, 2010

Limp Leather Binding - Black

This was another sewing variation I tried. This technique requires signatures in multiples of three. Rather than adding an additional piece of leather to wrap around, I added a leather button.
This is the end result.

2 comments:

  1. What are the steps for making a book like this?

    ReplyDelete
  2. Sorry, I've been off blogger for a while.

    First, I make my signatures and pre-punch the holes. Next, I cut a piece of leather to the size I need, making sure to account for spine thickness. Then, I use a piece of scrap paper to pre-punch the holes in the leather on the spine. Finally, sew it up :-)

    If you want step by step instructions, try the guide I uploaded to my site:

    https://sites.google.com/site/samquellportfolio/bookbinding-workshops

    ReplyDelete